Contact (800) 457-1818

Piranha® SLGR-MM04X250 HSPIR-SLGR-MM04X250
  1. pin-int

Piranha® SLGR-MM04X250 HSPIR-SLGR-MM04X250

Piranha® SLGR-MM04X250 Seamless Jetting/Lateral Line Thermoplastic Hose, 1/4 in Nominal, 250 ft L, 4000 psi, Green

  • Manufacturer: KURIYAMA OF AMERICA, INC
  • Brand Name: Piranha®
  • Part#: HSPIR-SLGR-MM04X250
  • MPN: SLGR-MM04X250
  • Qty. Interval: 1
  • loading NASHVILLE, TN
  • loading Available at All Branches
  • UOM: PC

A yellow seamless thermoplastic tube, double high-tensile synthetic fiber braid reinforcement and abrasion-resistant slick green polyether urethane cover.

Piranha® Seamless Jetting/Lateral Line Thermoplastic Hose, SLGR Series, Jetting/Lateral Line Thermoplastic Hose, 1/4 in Nominal, 1/4 in Inside Diameter, 1/2 in Outside Diameter, 250 ft Length, Polyurethane Tube, Polyurethane Cover, Braided Reinforcement, Green Hose, 2-1/2 in Bend Radius, 4000 psi, Resistance Properties: Abrasion, Cut, Fungus, Temperature High: 160 deg F, Temperature Low: -40 deg F, Additional Information: MNPTF Connection

Additional Information      :      MNPTF Connection
Bend Radius      :      2-1/2 in
Cover Material      :      Polyurethane
Hose Color      :      Green
Hose Type      :      Jetting/Lateral Line Thermoplastic
Inside Diameter      :      1/4 in
Length      :      250 ft
Nominal Size      :      1/4 in
Outside Diameter      :      1/2 in
Pressure Rating      :      4000 psi
Reinforcement      :      Braided
Resistance Properties      :      Abrasion, Cut, Fungus
Series      :      SLGR Series
Temperature High      :      160 deg F
Temperature Low      :      -40 deg F
Tube Material      :      Polyurethane
  • Constructed to provide rugged and reliable service under the most severe and demanding condition
  • Assures the user that they are using a WASTEC designated Piranha® hose product
  • Provides maximum resistance to hydrolysis
  • Contributes to low volumetric expansion and eliminates loss of strength from moisture absorption
  • Cover is ultra slipper, allows hose to maneuver around and through difficult sewer bends
  • Hoses are assembled male x male NPT threads as a standard
  • Polyurethane low coefficient of friction
  • All Piranha® sewer hoses are 100% pressure tested
  • Slick Slither® cover affords an easier handling hose to get the job done
  • Made in USA
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Kuriyama-Couplings_SLGR-MM02X250_Catalog.pdf