Gates® BB180 BLBB180

Gates® Hi-Power® Dubl-V belt is designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt. Use this Gates solution for all industrial serpentine applications that require rotation reversal on some driven shafts. It uses flex-bonded tensile cords, which are highly resistant to flexing forces and a protective Flex-Weave® cover. It is the ideal solution for serpentine drives (drives with counter rotating shafts) where power is transmitted from both the top and the bottom of the belts.

Gates® Hi-Power® Double V-Belt, Series: 9053 Series, BB Section, 182.9 in Outside Length, 0.65 in Top Width, 0.53 in Thickness, 36 deg Angle, Resists: Heat, Oil, -22 to 140 deg F, For Use With: Multi-Duty® Sheaves

• Gates® curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life
• Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
• The Flex-Weave® cover is a patented construction for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
• Static conductive (ISO 1813) and can as such be used in the conditions described in the directive 2014/34/EU-ATEX
• All sizes meet Gates® UNISET tolerances, they can be installed without matching
• Meets RMA oil and heat-resistant standards and static conductivity requirements
• Lower transmission from both sides of the belt
• Suitable for dirty/dusty environments

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Gates_AA51_Specification_Sheet.pdf