Contact (800) 457-1818

Gates® B212 BLB212
  1. pin-int

Gates® B212 BLB212

Gates® Hi-Power® II 9003 Series B212 V-Belt, B Section, 213.4 in L Outside, 0.69 in W Top, 0.44 in Thick

  • Manufacturer: Gates Corp
  • Brand Name: Gates®
  • Part#: BLB212
  • MPN: B212
  • UPC: 770075267546
  • Qty. Interval: 1
  • loading NASHVILLE, TN
  • loading Available at All Branches
  • UOM: EA

The wrapped classical section Hi-Power® V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power® belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.

Gates® Hi-Power® II V-Belt, Series: 9003 Series, B Section, 213.4 in Outside Length, 0.69 in Top Width, 0.44 in Thickness, 40 deg Angle, Resists: Heat, Oil, -22 to 140 deg F, For Use With: Multi-Duty® Sheaves

Angle      :      40 deg
Outside Length      :      213.4 in
Resists      :      Heat, Oil
Section Size      :      B
Series      :      9003 Series
Suitable For Use With      :      Multi-Duty® Sheaves
Temperature Rating      :      -22 to 140 deg F
Thickness      :      0.44 in
Top Width      :      0.69 in
  • Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear
  • The vulcanized flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads
  • The Flex-Weave® oil and heat-resistant cover protects the belt core from the toughest environments
  • Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
  • Gates® curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life
  • The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
  • Static conductive (ISO 1813) and can as such be used in the conditions described in the directive 2014/34/EU-ATEX
  • Belt edge is machined for even sheave-groove contact resulting in smoother running, less slip and wear
  • All sizes meet Gates® UNISET tolerances, they can be installed without matching
  • Meets RMA oil and heat-resistant standards and static conductivity requirements
  • High-quality rubber compound protects the belt against heat, ozone and sunlight
  • The belt will not catch fire from heat build-up, even with severe slippage
  • Long belt life reducing replacement and maintenance costs
  • Excellent performance/cost ratio
  • Reliability and efficiency
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Gates_A18_Specification_Sheet.pdf