Contact (800) 457-1818

Gates® A44 BLA44
  1. pin-int

Gates® A44 BLA44

Gates® Hi-Power® II V80® A44 V-Belt, A Section, 45.94 in L Outside, 0.53 in W Top, 0.34 in Thick, EPDM Rubber

  • Manufacturer: Gates Corp
  • Brand Name: Gates®
  • Part#: BLA44
  • MPN: A44
  • UPC: 072053201666
  • Qty. Interval: 1
  • loading NASHVILLE, TN
  • loading Available at All Branches
  • UOM: EA

The wrapped classical section Hi-Power® V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power® belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.

Gates® Hi-Power® II V80® V-Belt, A Section, 45.94 in Outside Length, 0.53 in Top Width, 0.34 in Thickness, 38 deg Angle, 1 Ribs, Resists: Aging, Heat, Oil, Ozone, Slippage, Sunlight, Weather, EPDM Rubber, -22 to 140 deg F

Angle      :      38 deg
Material      :      EPDM Rubber
Number of Ribs      :      1
Outside Length      :      45.94 in
Resists      :      Aging, Heat, Oil, Ozone, Slippage, Sunlight, Weather
Section Size      :      A
Temperature Rating      :      -22 to 140 deg F
Thickness      :      0.34 in
Top Width      :      0.53 in
  • Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear
  • The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads
  • The flex weave oil and heat-resistant cover protects the belt core from the toughest environments
  • Flex-bonded cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration
  • Gates® curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life
  • The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
  • Static conductive (ISO 1813) and can as such be used in the conditions described in the directive 2014/34/EU- ATEX
  • Belt edge is machined for even sheave groove contact, resulting in smoother running and less slip and wear
  • All sizes meet Gates UNISET tolerances, they can be installed without matching
  • Meets RMA oil and heat-resistant standards and static conductivity requirements
  • High quality rubber compound protects the belt against heat, ozone and sunlight
  • The belt will not catch fire from heat buildup, even with severe slippage
  • Long belt life reducing replacement and maintenance costs
  • Excellent performance/cost ratio
  • Reliability and efficiency
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Gates_A21_Catalog.pdf