Contact (800) 457-1818

Gates® 3VX1060 BL3VX1060
  1. pin-int

Gates® 3VX1060 BL3VX1060

Gates® Super HC® 9412 Series 3VX1060 V-Belt, 3VX Section, 105.97 in L Outside, 0.38 in W Top, 0.33 in Thick, Ethylene

  • Manufacturer: Gates Corp
  • Brand Name: Gates®
  • Part#: BL3VX1060
  • MPN: 3VX1060
  • UPC: 072053266580
  • Qty. Interval: 1
  • loading Available at NASHVILLE, TN
  • loading Available at All Branches
  • UOM: EA

When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC® Molded Notch Belts. Our proprietary construction process provides a superior combination of flex and load-carrying capacity, transmitting up to 3X the horsepower versus comparably sized belts. Super HC® MN V-belts put more power where high speeds, high-speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts. Developed through specialized research, Super HC® MN is highly recommended for use on all industrial heavy-duty, narrow section V-belt drives. With an increased transmission efficiency this belt allows for a more compact and highly economical drive design.

Gates® Super HC® V-Belt, Series: 9412 Series, 3VX Section, 105.97 in Outside Length, 0.38 in Top Width, 0.33 in Thickness, 44 deg Angle, Resists: Fatigue, Flexing Force, Shock, Tensile, Ethylene, -70 to 250 deg F, For Use With: Super HC® Sheaves

Angle      :      44 deg
Material      :      Ethylene
Outside Length      :      105.97 in
Resists      :      Fatigue, Flexing Force, Shock, Tensile
Section Size      :      3VX
Series      :      9412 Series
Suitable For Use With      :      Super HC® Sheaves
Temperature Rating      :      -70 to 250 deg F
Thickness      :      0.33 in
Top Width      :      0.38 in
  • Flex-bonded tensile cords are vulcanized as one solid unit making the belt highly resistant to tensile and flexing forces, fatigue and shock loads
  • Precision-ground straight sidewalls give a uniform wedging action and ensure the belt fits correctly in the pulley grooves
  • Molded notches reduce and evenly distribute thermal and bending stresses
  • Machined belt edge provides maximum sheave-groove contact for even wear and extended belt life
  • Proprietary Flex-Weave® cover protects the belt's interior from oil, contaminants and heat
  • Promotes smoother, quieter operation, with less slippage and belt wear
  • Elastomeric compound protects the belt against heat, ozone and sunlight
  • Even with severe slippage, the belt will not catch fire from heat build-up
  • Designed for high horsepower, space-constrained applications
  • Improved belt life reducing expensive maintenance time
  • Optimally constructed for small sheave diameter drives
  • The molded notch pattern also reduces noise
  • Patented ethylene material construction
  • More compact design compared to classical section V-belts
  • Cost and space savings by reducing size of pulleys, bearings, guards and mounts
  • All sizes meet Gates® UNISET tolerances, they can be installed without matching
  • Static conductive (ISO 1813) and can as such be used in the conditions described in the directive 2014/34/EU-ATEX
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Gates_10_3VX300_Specification_Sheet.pdf