Contact (800) 457-1818

Gates® 3V1250 BL3V1250
  1. pin-int

Gates® 3V1250 BL3V1250

Gates® Super HC® 9332 Series 3V1250 V-Belt, 3V Section, 124.89 in L Outside, 0.4 in W Top, 0.31 in Thick, Neoprene

  • Manufacturer: Gates Corp
  • Brand Name: Gates®
  • Part#: BL3V1250
  • MPN: 3V1250
  • UPC: 072053267327
  • Qty. Interval: 1
  • loading NASHVILLE, TN
  • loading Available at All Branches
  • UOM: EA

The Gates® Super HC® V-belt combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. It transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC® V-belts also have exclusive Gates® construction features for longer life on your drives.

Gates® Super HC® V-Belt, Series: 9332 Series, 3V Section, 124.89 in Outside Length, 0.4 in Top Width, 0.31 in Thickness, 39 deg Angle, Resists: Heat, Oil, Neoprene, -22 to 140 deg F, For Use With: Super HC® Sheaves

Angle      :      39 deg
Material      :      Neoprene
Outside Length      :      124.89 in
Resists      :      Heat, Oil
Section Size      :      3V
Series      :      9332 Series
Suitable For Use With      :      Super HC® Sheaves
Temperature Rating      :      -22 to 140 deg F
Thickness      :      0.31 in
Top Width      :      0.4 in
  • Meets RMA oil and heat-resistant standards and static conductivity requirements
  • Up to 300% capacity increase over classical belts
  • Flex-bonded cords are strongly forged to the belt body, resulting in equal load distribution, resistance to fatigue and shock loads and the absorption of bending stress without cord deterioration
  • Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear
  • Notches molded into the belt during manufacturing increase flexibility, making this belt well-suited for drives with smaller diameter sheaves
  • The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
  • Gates® curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life
  • The vulcanized flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads
  • Belt edge is machined for even sheave-groove contact resulting in smoother running, less slip and wear
  • The belt will not catch fire from heat build-up, even with severe slippage
  • The Flex-Weave® oil and heat-resistant cover protects the belt
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Gates_3V250_Specification_Sheet.pdf