Gates® 3/3V710 BL3V710/3

When uptime is a must, equip your drives with Gates® Super HC® PowerBand® belts. Super HC® PowerBand® belts offer a solution for drives where single belts vibrate, turn over or jump off the pulleys. With a superior combination of flex and load, the PowerBand® construction consists of multiple V-belts joined together by a permanent, high-strength tie band that functions as a single unit. This means a tougher, more stable solution with even load distribution and each strand fitting securely in the sheave-groove.

Gates® Super HC® PowerBand® V-Belt, Series: 9385 Series, 3V Section, 70.97 in Outside Length, 1.2 in Top Width, 0.34 in Thickness, 38 deg Angle, 3 Ribs, Resists: Fatigue, Flexing Force, Shock, Tensile, Neoprene, -22 to 140 deg F, For Use With: Super HC® Sheaves

• Highly resistant to tensile and flexing forces, fatigue and shock loads
• High stability and smooth running on the toughest drives
• Flex-bonded tensile cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
• Flex-Weave® cover is a patented fabric construction for longer life, providing extended protection to the belt core from oil, dirt and heat
• Concave sidewalls provide proper cord support and full contact with the sheave-groove for equal loading and uniform wear
• Gates® curves provide full contact with pulley grooves for uniform loading of cords, uniform wear and increased belt life
• The tie band assures high-lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
• Strong band controls belt-to-belt distance and prevents sideways bending

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Gates_3V250_Specification_Sheet.pdf